Fevobot is a contactless automatic wall mounted thermometer. Fevobot can perform a rapid fever check (in 0.5Sec) with 99.5% accuracy. This makes it an ideal solution for places with large footfalls. FevoBot works independently (without human moderation) by installing it on a wall or tripod or connecting with a smart device like Tablet, Computer, or Biometric Attendance system for data-logging.
Automatic Wall mounted Fever Detection System
Fevobot is a Contactless Automatic Wall mounted Thermometer. Fevobot can perform a rapid fever check (in 0.5Sec) with 99.5% accuracy. This makes it an ideal solution for places with large footfalls. FevoBot works independently (without human moderation) by installing it on a wall or tripod or connecting with a smart device like Tablet, Computer, or Biometric Attendance system for data-logging.
Forehead Thermal Scanner
($20 - $100)
Works on infrared technology but
no credibility of sensor
Human intervention required
Not a suitable solution to handle
long queues ad crowds due to
manual process and slow detection
Variable accuracy depending upon
the operator. Manual operation
increases the chances of error.
No data outputs for auxiliary
Require manual data-entry for
Gives higher error in unfavourable
No privacy issue
Fevobot Contact-less Fever
Detection System ($195)
Uses OMRON thermopile sensor with
99.5% accuracy which is proven by
NABL Accredited Lab.
No human intervention or supervision
Fevobot can handle long queues and
crowd due to its ultra-fast screening
Higher accuracy with the automated
measurement using a distance sensor
Offers USB output for external
software integration like Fevo-App,
HRMS, ERP. Offers integration
possibility with digital attendance
system or door-access control system.
Automated data-logging if connected
with external hardware/software.
Auto calibration based on ambient
conditions. Ideal for all locations
No Privacy issue as the camera is not used in the solution.
Scanner ($2000 onwards)
Uses multi-point infrared sensor
which works on a similar principle as
No human intervention or
Not recommended for crowd
scanning unless very high-resolution
Accuracy depends on distance and
resolution of camera
Some models provide data outputs
for auxiliary devices
Automated data entry available
based on its software capability.
Accuracy depends on exposure to
higher ambient temperature & UV
Privacy concerns due to camera
Fevobot automatically gets calibrated as per the ambient conditions within 30 seconds of initiation. This auto stabilization feature makes Fevobot a preferred choice to be used under any ambient conditions without having any impact on its accuracy.
Fevobot automatic wall mounted thermometer performs a temperature check within 0.5 sec with 99.5% accuracy. This makes Fevobot an ideal solution to screen a long queue or a crowd at public hotspots.
Fevobot comes with an internal battery to last for a sufficient amount of time in case of power loss.
Fevobot performs an accurate temperature check using Contactless Omron Infrared Thermal Sensor. Every Fevobot passes through a series of calibration and quality checks to deliver temperature measurement with 99.5% accuracy (as per NABL Accredited Lab Certificate).
FevoBot automatic wall mounted thermometer performs a fever-check without any human moderation. It is an independent system that works autonomously for fever screening at important check-points.
Fevobot can connect with a biometric attendance system or an access control system using a USB-A Connector. It can communicate using a proprietary USB-Protocol. The data integration protocol can be provided for device-to-device communication. Fevobot can be connected with a system operating on Android, Linux, or Windows using a USB-A connector. Fevobot can also communicate with a software/application running in the system using USB-Communication Protocol.
Fevobot is specially designed to fit on any surface. You can install the device with the bolt and keyhole, Adhesive tape, or tripod mount. Anyone can install Fevobot without any technical support.
99.5% (±0.2°C for multi-point validation between 30°C to 42°C)
35°C - 43.2°C (95°F - 109.8°F)
3 - 15 CM
0.1°C / 0.1°F
OMRON Thermopile array sensor (non-contact infrared sensor)
4 nos. of a single colour, 7 segments LED display (0.56-inch Character Size)
Safe: single beep, Unsafe: Beeps 5 times | Noise level: 85 Db
130mm (Height) x 80mm (Width) x 81mm (Depth)
232 mm (Length) x 62 mm (Width) x 166 mm (Height)
Weight: ~180 Grams
Temperature 10°C - 40°C (50°F - 104°F)
Humidity: Between 15% and 95%
Temperature -15°C to +55°C (-13°F to 131°F)
Humidity: Between 15% and 95%
1800 mAh Lithium Battery | 24hours backup on standby
5V DC using micro-USB